Refrigerant R290: Characteristics, Performance, And Usage Features

Jan 19, 2024

Leave a message

R290 refrigerant (propane) is a colorless and odorless gas used in refrigeration and air conditioning equipment. Non toxic, highly flammable when mixed with air at a concentration of 0.021 to 0.095. As a natural refrigerant, this article will discuss R290 refrigerant: the characteristics, properties, and features of this gas.

R-290 has a promising future. It exists in nature and can be obtained without chemical synthesis. Propane has good cooling performance. The characteristic of this refrigerant technology is low power consumption. The global warming potential (GWP) of R290 is 3. There is no ozone depletion potential (ODP). In contrast, the ODP of R22 refrigerant is 0.05 and GWP is 1.810. Therefore, the possibility of prohibiting or restricting the use of propane as a refrigerant is very small.

 

3

 

R290 has been used for cooling systems. This is mainly industrial equipment, but in some countries/regions, household refrigerators are produced using this refrigerant.

R-290 refrigerant is recommended by the Environmental Protection Agency as a substitute for hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs). The organization does not recommend using it for automotive air conditioning. The reason is that once a leak occurs, there is a high risk of gas ignition.

R-290 is used as a refrigerant in the following fields:

Cooling device;

Multi zone air conditioning;

Heat pump;

Household, commercial, and industrial refrigerators and freezers;

Industrial cooling system.

R290 is a combustible gas. When its concentration in the air is between 2.1% and 9.5%, it will burn. During the combustion process, no toxic substances will be released. At temperatures above 650 degrees Celsius, it will decompose into ethylene and ethane.

The working pressure of R290 refrigerant is higher than that of R600a, R134a, R22 and similar substances. In equipment using propane as a refrigerant, a large working capacity compressor is installed, and the copper pipe wall of the Freon pipeline is thicker than usual.

Pure propane has no odor. But some specifications indicate that it has a sweet taste. This is the case when adding odorants to gas. Refrigerant manufacturers use it for safety purposes so that people can feel it in the event of a leak.

The amount required to add R290 to the system is also much less. When refueling the system, it can save 60%.

Unlike other fluorocarbons, R290 is compatible with any compressor oil (mineral oil, alkylbenzene, polyol ether). But the best cooling performance is demonstrated using POE oil.

Storage and Handling of R290 Refrigerant

Avoid damaging the gas cylinder. Do not drag, scroll, or drop them.

Store the container containing R290 refrigerant in a well ventilated area.

Keep the gas cylinder away from direct sunlight.

Store R290 separately from containers containing oxidants.

Do not heat the steel cylinder to a temperature above+50 degrees Celsius.

When using R290 refrigerant, ensure that all equipment is grounded.

Make sure that no water, air, or other refrigerant enters the cylinder from the system you are using.

Ensure good ventilation in the room when handling refrigerants.

Send Inquiry
Send Inquiry