Application Of High Activity And Low Molecular Weight Polyisobutene

Jan 12, 2024

Leave a message

Polyisobutylene is a general term for the homopolymer products of isobutene (2-methylpropene). Due to the different chain termination methods of polyisobutene, there are many types of double bonds at the end of the isobutene molecules generated by the reaction: binary substituted double bonds (alpha terminal double bonds), ternary substituted double bonds, and quaternary substituted double bonds.

The proportion of various types of substituted double bonds depends on the performance of the catalyst, reaction temperature, and reaction period. The longer the reaction period, the easier it is to generate chemically stable quaternary and ternary substituted double bonds. When aluminum trichloride is used as a catalyst, most of the double bonds at the end of the isobutene molecules generated by the reaction are ternary substituted double bonds, followed by quaternary substituted double bonds, and binary substituted double bonds are the least (10%). When boron trifluoride is used as a catalyst, most of the double bonds at the end of the isobutene molecules generated by the reaction are binary substituted double bonds (70% -85%), followed by ternary substituted double bonds, and quaternary substituted double bonds are the least. Low molecular weight polyisobutene with high alpha terminal double bond content is called high activity polyisobutene (HRPIB; HighlyReactivePolyisobutylene), It plays a prominent role in many application fields and can be used as an intermediate for producing various derivatives. In addition, highly active polyisobutene has broad application prospects in the fields of emulsion explosives, surfactants, cleaning agents, and rust inhibitors.

 

00

 

The application of high activity polyisobutene has almost penetrated into all application fields of low molecular weight polyisobutene (LPIB), but due to the higher production cost of high activity polyisobutene compared to traditional LPIB products, it is currently mostly used for the production of high activity polyisobutene ash free dispersants, polyisobutene amines, etc.

1. Highly active polyisobutene ash free dispersant

High activity polyisobutene ash free dispersant is an improved product of polyisobutene ash free dispersant [9-12], belonging to low chlorine ash free dispersant. It is synthesized by hot addition process using high activity polyisobutene, maleic anhydride, and polyethylene polyamine as raw materials. In addition to the general properties of chlorination products, it also has the following characteristics: low chlorine content, which can meet increasingly strict environmental protection requirements; The appearance color is relatively light; Low turbidity, good compatibility with additives such as ZDDP. High activity polyisobutene ash free dispersant does not produce residue or blue smoke after combustion; Highly active polyisobutene ash free dispersant does not contain chlorine and does not produce harmful dioxins during combustion.

2. Polyisobutene amine

Polyisobutylene amine (PIBA) is a highly active surfactant produced by using highly active polyisobutene with a very narrow molecular weight distribution as the main raw material, through processes such as oxidation amine hydrolysis composite. It is the main raw material for producing fourth generation gasoline detergents. Polyisobutylamine has dispersing, cleaning, demulsification, and antioxidant properties. Gasoline detergents formulated with it can effectively remove deposits and carbon deposits on key parts of the engine, such as nozzles, intake valves, and combustion chambers, reducing engine exhaust emissions and fuel consumption.

There are many production processes for polyisobutene amine, mostly using high activity polyisobutene with a molecular weight of 1000 as the main raw material.

Highly active polyisobutene undergoes free radical anti Markovnikov addition reaction with HBr gas in the presence of peroxide to produce brominated polyisobutene, which can then undergo nucleophilic substitution reaction with ammonia to produce polyisobutene amine.

Highly active polyisobutene can be oxidized with hydrogen peroxide to prepare epoxy polyisobutene, which can be hydrolyzed with ethylenediamine to obtain polyisobutene amine. Experimental research has determined the optimal preparation process: epoxidation temperature of 80-85 ℃, reaction time of 5-6 hours; The temperature for amine hydrolysis is 130-150 ℃, and the reaction time is 6-8 hours.

Highly active polyisobutene can undergo carboxylation reaction with carbon monoxide and hydrogen at certain pressure and temperature to obtain polyisobutene alcohol, which can then react with ammonia at certain pressure to produce polyisobutene amine.

3. Other

Highly active polyisobutene can react with hydroxyl aromatic compounds such as phenol to produce polyisobutyl hydroxyaromatic, with a significant increase in conversion rate. Polyisobutylene phenol is a good dispersant.

Highly active polyisobutene can further derive numerous new products, which can be used to prepare various grafts and blocks. Many new applications are gradually being developed, such as multifunctional wetting agent polyisobutene glycerol ester and plasticizer in polymer materials.

Amoco Chemical Company uses highly active polyisobutene as an internal plasticizer, replacing coagulants and reducing solvent usage, thereby reducing organic volatile matter content and coating odor.

A coupling agent for organic polymer filling modification can be prepared by grafting highly active polyisobutene and maleic anhydride. The coupling agent can effectively improve the compatibility and adhesion of organic polymers and inorganic fillers, and has the advantages of no pollution, precise grafting rate control, and wide application range.

Send Inquiry
Send Inquiry